Chapter 3: Writing and publishing posts and pages

What this chapter covers

This is the everyday work, and the reason most people connect a site at all. You will start a post or a page, open one that is already on your site, save it on your computer, send it as a draft, publish it, and schedule it for later.

You will also see what QUILL does when someone else changed the page while you were working, what happens when the connection drops, and how to get an earlier version back. Then you will look after your posts and pages as a list, in the Workbench. The chapter ends with Send and Copy, which move writing between documents and sites.

By the end you can take a page from an empty document to published, and find it again later.

Posts and pages

WordPress has two kinds of writing, and QUILL keeps them apart the way WordPress does:

Many sites have their own kinds as well, such as events or recipes, added by a plugin or the theme. QUILL’s Open window lists those beside Posts and Pages.

Writing something new

  1. Choose File > WordPress > New Post… or File > WordPress > New Page…. The window opens on Site, with your default site chosen.
  2. Tab to Title and type it. The title is what visitors see at the top of the page and in lists.
  3. Tab to Slug. It has filled itself in from the title as you typed: the slug is the last part of the page’s web address, so “Spring Workshop” becomes spring-workshop. Leave it alone to keep it, or type your own.
  4. Choose Markdown or HTML under Write in.
  5. For a post, check the Categories and Tags it belongs to. Space checks or unchecks each one.
  6. Press Create.

You hear “New post for” your site’s name, and that nothing is sent until you choose Save Draft to Site or Publish. The new document opens, empty, ready for your first paragraph.

Markdown or HTML? Markdown is the easier one to write by ear. Two number signs and a space start a heading, a dash and a space start a bullet, and QUILL turns it into what WordPress needs when you send it. HTML gives you exact control, and is right if you already think in tags. You cannot switch a document between the two later. A document that started as Markdown is always read as Markdown, so nothing on your page is ever reinterpreted. QUILL remembers your last choice for next time.

Do not repeat the title as a heading. Your theme already shows the title at the top of the page as its main heading. Start straight in with your first paragraph, and use Heading 2 for the sections inside. Check Before Publishing points it out if you forget.

Everything else is in Properties. The excerpt, the featured image, whether comments are open and the rest are not asked up front. They are in File > WordPress > Properties…, described later in this chapter.

Opening what is already there

File > WordPress > Open Page or Post… asks which site, then which kind: Posts, Pages, or any kind your site adds, such as Events. Then the Open window lists everything of that kind, newest change first. Each row says the title, its status (published, draft, pending review, scheduled, private or in the Trash) and when it last changed, for example “Opening Hours, published, yesterday”.

When you open a page, QUILL asks how you want to see it:

Either way, nothing on the site changes by being opened. A block you did not touch goes back exactly as it came, byte for byte.

You hear “Opened Opening Hours from Community Radio.” If you already had a working copy of that page on this computer, QUILL opens your copy rather than a second one.

An unsaved version. If the page has an autosave newer than the copy on the site, from a browser or from QUILL, QUILL asks first: “There is an unsaved version from yesterday, 4:12 PM. Open that instead?” Choose which one you want.

Opening a page from its web address

File > WordPress > Open by Web Address… is the quickest route when someone sends you a link to the page that needs fixing.

  1. Copy the page’s address, from an email or from your browser’s address bar.
  2. Choose Open by Web Address. QUILL has already picked the address up from the clipboard.
  3. Press Enter.

QUILL works out which of your sites the address belongs to, even if it is not your default. It understands an ordinary address such as https://example.org/opening-hours/, and the short forms WordPress uses, such as ?p=42 and ?page_id=7. If the page is already open, QUILL takes you to it instead of opening a second copy.

Your local drafts

File > WordPress > Open Local Draft… lists everything you have written for any of your sites that is saved on this computer, with the site each one belongs to. It is where a new post you started yesterday is waiting, and where QUILL Cast, QUILL Studio and Quill Converter leave the drafts they make for you (Chapter 5).

The three ways to save

There are three kinds of save, and each does one thing:

Command What happens
Ctrl+S Saves on this computer. Nothing is sent.
Save Draft to Site Sends an unpublished draft. Visitors cannot see it.
Publish or Update… Publishes it, or updates the published page, after you confirm.

Both of the last two are in File > WordPress. Closing a WordPress document never publishes it, and never sends anything.

Save Draft to Site

Save Draft to Site puts your writing on the site where only you and the site’s editors can see it. It is the safe way to try it in the site’s own preview before anybody else reads it. You hear “Draft saved to Community Radio. It is not public.”

If you put pictures in from your computer, they are uploaded now, and their addresses are swapped into your page.

On a page that is already published, QUILL asks first: “This post is published. Save as a draft and take it off the site, or update the published post?” Update the published post is first, and keeps it on the site with your changes. Save as a draft and take it off the site unpublishes it, so only people who can edit the site see it.

Publish or Update

  1. Choose File > WordPress > Publish or Update….
  2. QUILL runs Check Before Publishing on the page, then asks. The question names the title and the site, such as “Publish on Community Radio: Spring Workshop”, and says what the check found: “Ready to publish: no problems found”, or, for example, “2 things to look at: 1 problem, 1 to check”.
  3. Read the findings if there are any. None of them stop you. Choose Publish, or Publish Anyway when there are findings, or Escape to go back and fix them.

You hear “Published on Community Radio. The address is on the clipboard.” The page’s web address is ready to paste into an email.

A page that is already published says Update instead of Publish. A private or scheduled page keeps that status when you update it.

Open on Site (in File > WordPress) opens the page in your browser, so you can hear it the way a visitor will. Copy Address puts its address on the clipboard again later. A draft’s address only opens for someone signed in to WordPress, and QUILL says so when it copies one: “Draft address copied. It needs a WordPress sign-in to open.”

A new page is not in your menus yet. WordPress does not add a new page to the site’s navigation by itself. The first time a page is published, QUILL asks “Add it to a menu?” with three answers: Yes, open Menus, which opens the Menus window with the page added at the end; Not this time; and No, and stop asking for that site.

If you are a Contributor, the command is called Submit for Review, and your post goes to the site as pending review for an Editor to publish.

When someone else changed it first

Before every update, QUILL asks the site when the page last changed. If someone changed it after you opened it, perhaps a colleague in the block editor, QUILL will not overwrite their work. Nothing is sent. Instead you hear who changed it and when, and get three choices:

Scheduling a post

To publish later, open the page or post and choose File > WordPress > Schedule Publish….

  1. Type the date, such as 2026-11-20.
  2. Type the time, such as 16:15 or 4:15 PM.
  3. Pick the time zone. Your site’s own time zone is at the top of the list.
  4. Press OK.

QUILL reads the date and time back to you with the site’s name before anything is sent. If the time is in the past, or is not one QUILL can read, the window opens again with the problem at the top.

The page then shows as scheduled in Open. To move it, or publish it straight away, open it and choose Schedule Publish again. You get two choices: Change the schedule or Publish now.

Tools > WordPress > Your Sites > Coming Up on All Sites… lists everything scheduled on all your sites, soonest first.

Autosaves, and when the connection drops

Autosaves. While a WordPress document is open, QUILL keeps an autosave every two minutes whenever the text has changed: on this computer, and, once the page is on the site, as your account’s autosave there too. It is the same autosave the WordPress editor keeps, so if your computer dies, the words are safe on the site. You hear nothing when it works. If it stops working, QUILL tells you once.

When a send gets no answer. Your copy stays on this computer, and QUILL asks the site what happened before doing anything else, so nothing is ever created twice. If the page did arrive, you hear the usual result. If it did not, QUILL offers Try Again.

When the site cannot be reached at all, the send waits in a queue. You hear, for example, “Community Radio cannot be reached, so ‘Hours’ is queued.” QUILL tries again every two minutes and tells you when it goes through: “Back online: 2 drafts sent to Community Radio.” A queued publish is never sent over somebody else’s newer change: QUILL checks first, and if the site’s copy changed, it tells you and sends nothing.

A schedule is never queued. It is a time you chose, and sending it late could be worse than not sending it, so QUILL tells you it failed instead.

Properties

File > WordPress > Properties… holds everything about the page apart from its words:

Changes are kept with your copy and go to the site the next time you send it.

File > WordPress > Custom Fields… shows just the extra fields your site’s plugins and theme keep for a page, such as an SEO title or an event date. Fields that hold a list or a group, such as speakers or an address, come next in their own window, where you can add, change, remove and reorder the items.

Some plugins add their fields to every page and post. The Events Calendar, for example, adds more than thirty event, venue and organizer fields to an ordinary post. So that the fields you came for are easy to find, Custom Fields hides the fields a plugin adds to everything, and its opening sentence says how many it hid and whose they are. Check Show all fields (Alt+S), the first box in the window, and choose OK: the window opens again with every field, and anything you already typed is kept. WordPress’s own fields, QUILL’s own, Yoast SEO’s title, description and focus keyphrase, and any field that does not belong to a plugin QUILL knows are always shown. A hidden field is never changed or removed.

File > WordPress > Plugin Fields… changes the fields of The Events Calendar, WooCommerce, Yoast SEO and Rank Math, where your site has them.

Previous versions, and comparing

File > WordPress > Previous Versions… lists earlier versions, newest first. Each row says when it was kept and why, such as “Opened from site”, “Saved”, “Site copy before update” or “Before restore”. The site’s own history is in the same list, marked “On the site”, so the list is the page’s whole history.

File > WordPress > Compare with Site shows the lines that differ between your copy and the site’s. It starts with a count, such as “Comparing your copy with the copy on Community Radio: 1 line added, 3 removed, in 2 places”, then gives each change with where it is (“Lines 10 to 15:”). Each line starts with a mark: “Removed” is on the site and not in yours, “Added” is yours and not on the site, and “Unchanged” is the same in both. The marks follow the style you chose for every difference in QUILL (Kelly Ford’s four: words, short words, diff symbols, or diff symbols with changed lines); in QUILL you choose it in Compare Files or in the GitHub Workbench’s Line marks, and QUILL Lite uses the same saved choice.

The Trash

File > WordPress > Move to Trash… moves the page to WordPress’s Trash, after naming it and the site. It is not deleted, and a copy stays on your computer.

To bring one back, choose File > WordPress > Open Page or Post…, type trash in Find, press Enter, and press Restore from Trash on the row. You hear “‘Hours’ is back on Community Radio as a draft. Open it to publish it again.”

In the Workbench, each site’s Posts and Pages have a Trash place of their own. Select what you want back and press Ctrl+Shift+R, as the next section shows.

Your posts and pages in the Workbench

The editor is for one page at a time. When you want to see them all, or change many at once, use the Workbench (Chapter 2).

From the page you are writing. File > WordPress > This Post in the Workbench (the WordPress key, then Shift+H) opens the Workbench on the list your post lives in, with your post selected. If it is further down than the rows loaded so far, QUILL searches for it by title once. A document that is not on the site yet says to use Save Draft to Site first.

From the Workbench. Each site has Posts and Pages, and under each a place for every status: Published, Drafts, Pending, Scheduled, Private and Trash. Pages show as a tree, each under its parent. A site’s own kinds, such as Events, are under More Content Types, each with the same status lists, including any extra statuses the site adds.

On a post or page:

Many at once. Select several posts and press Alt+Enter. One sheet changes their status, author, comments, template, parent page, or categories and tags, added or taken away. The preview lists every post, and the report says how each one went, so one refusal never stops the rest. Ctrl+Z puts back the ones that changed.

The Trash. Delete moves the selection to the Trash. In a Trash place, Item > Restore from Trash (Ctrl+Shift+R) brings them back, and Empty Trash… on the context menu deletes everything there for good, after naming what it will delete.

Reviewing other people’s posts

A Contributor’s posts wait in Needs My Attention > Pending Review, from every site. The Queue column says where each one stands, such as “2 of 5 waiting”. On a post:

WordPress sends no email for any of these, and each one says so. Tell the writer yourself.

The Calendar

Go > Calendar (Ctrl+3) lists every site’s scheduled and published content a day at a time, with a place for each day, your sites’ own content types included. On a scheduled post, Item > Move to Another Day… (Ctrl+Alt+Shift+D) asks for the new date and time and reads it back in the site’s time and yours. A time that does not exist, because the clocks went forward, is refused. A time that happens twice, when they go back, asks you which one you mean.

Send and Copy

File > WordPress > Send and Copy moves writing between your documents and your sites:

A walk-through: fixing one sentence someone sent you

A volunteer emails you a link: the opening hours on your site are wrong.

  1. Copy the link from the email.
  2. Choose File > WordPress > Open by Web Address… and press Enter.
  3. QUILL asks Open as. Choose Markdown. You hear “Opened Opening Hours from Community Radio.”
  4. Use Find to get to the wrong sentence, and fix it.
  5. Choose File > WordPress > Publish or Update…. You hear “Update on Community Radio” and what the check found.
  6. Choose Publish. You hear “Published on Community Radio. The address is on the clipboard.”
  7. Paste the address into your reply to the volunteer.

The guided lesson Open a page by its address and fix a sentence, in Help > Tutorials, walks through the same thing on a test site.

Where to next